A coffee table is one of the more common and practical configurations when it comes to rows of chairs. A row of coffee tables will use different materials according to the needs of different occasions.

1. aluminum coffee table board

Aluminum alloy characteristics: aluminum alloy density is low, but the strength is relatively high, close to or more than high-quality steel, good plasticity, can be processed into a variety of profiles, with excellent electrical conductivity, thermal conductivity and corrosion resistance.

2. Stainless steel coffee table
Stainless steel features: stainless steel does not produce corrosion, pitting, rust or wear, has corrosion resistance, enhanced strength, steel deformation is not easy to crack, good environmental performance, not easy to rust. The surface by spraying coloring, combined with increased strength, but the surface of the zinc layer after the destruction of corrosion resistance also relatively disappeared.

3. medium density fiberboard coffee table board
Characteristics of MDF: Due to the uniform fiber structure, high bonding strength between fibers, its static bending strength, plane tensile strength and modulus of elasticity are better. However, because MDF is ground into fibers, it completely changed the structure of the wood, so moisture absorption, water absorption, thickness expansion rate are higher, and holding nail force than particleboard poor.

4. Carbon special back coffee table
Features of carbon special backsheet: after the heat treatment temperature reaches the graphitization temperature, the material has a high degree of graphitization. Easy to graphitize carbon. Commonly available are coke, graphitized intermediate phase carbon microspheres and carbon fibers. It is found that the soft carbon anode material has the advantages of low and stable charge/discharge potential platform, large charge/discharge capacity, high efficiency and good cycling performance.